Some of My Work

Created with flickr badge.
Showing posts with label tracing. Show all posts
Showing posts with label tracing. Show all posts

Tuesday, 17 November 2015

Chapter 4 - The Slides

So my slides for my box consisted of black mounting board, black cartridge paper and a map on either acetate or tracing paper.

To make the map to give to my family to fill out, I took some screenshots of off google maps and then edited them so that map was only a black line to mark the roads. After each of my family members filled them out, I traced what they had written on either acetate or tracing paper, these were the maps that were going to go on the inside of the slides. To make them more secure and to protect the writing I laminated them.




I had tried out different methods of making the slides to see what would be the most secure and least flimsy to put on display. I found that cutting a window out of mounting board to be the most secure and suitable albeit it was the most expensive method. For the backing this didn't need to be as solid so I used black cartridge paper.



The process of making the slides was simple enough, however it was time consuming and was murder on my hands as I was having to be precise with the scalpel a lot of the time. I had took all the measurements to make sure the slide would be in the centre of the box and from this I made a template that I would follow and draw out all the slides from this rather than having to measure out all of the time. From the mounting board I cut out the shape and then the window for each of them and followed this same process for the cartridge paper.



After this was all done I found that to make the slide completely centred I would need to take off 5mm from the bottom of each of them. To do this I just used the guillotine and also used this to neaten and square off the edges.

In the next post I'll talk about the set up of my box - we're getting close to the end now :)

bbbbyyyyyyyyyyeeeeeeeeeeeeeee
Róisín -x

Friday, 6 November 2015

Light Boxes

Since my last post I had the idea of displaying my maps in a light box. So what I did was using a display box I got from a charity shop I glued in a push controlled LED light to the inside. I placed my maps behind the glass and then secured them in place using a glass photoframe.






However this light box didn't work quite as I had planned as the light didn't diffuse properly through the layers of paper. I think even if it had worked better I might not have followed through with it as I want the layers of tracing paper to be able to be flipped over by people.

Now I am thinking of displaying it like a tourist information board with the layers of tracing paper on top that people can lift and look through.

Here are the sketchbook pages I have:











byeee -
Róisín-x

Layers

So I'm continuing on with my mapping idea for my Non-Place project.
My newest idea for this is to layer on sheets of acetate, or tracing paper to show how areas have changed meaning to me/ mean different things to other people.

What I am planning on doing right now is copying out the Carron Dams Reserve map  but with out the information like street names and points of interest etc. and then getting myself, my dad, and my brother to fill out how we feel about these areas. What I am then going to do is trace over these and then layer them over either the original map or the blank one. I am also planning on creating some sort of light box to see how the light travels through each layer revealing each persons notes.

So here's a list of the pages I have done since my last post.














I have yet to complete a couple of my ideas and therefore need to complete another couple of sketchbook pages as these ideas were sort of abandoned after I thought of this idea. The reason that these have been placed on the back burner is that I think that my map idea will work really well and will communicate what I am trying to say the best.

So see ya next time!
byeee,
Róisín -x