Some of My Work

Created with flickr badge.
Showing posts with label box. Show all posts
Showing posts with label box. Show all posts

Wednesday, 18 November 2015

Chapter 5 - The Setup

So this post is going to be about the finishing touches and the display of my box.


I was undecided on whether or not I was going to add the map that I asked everyone to fill out, but after talking to my lecturer about it, I decided it would be better if I did, as this would mean that there was still something to look at even if there weren't any slides in the box.


To attach the box to the wall I added in four mirror brackets to the back of it, two would have probably been enough, but I really wasn't up for risking it for the sake of two mirror brackets which were £1.50 for a pack of 20 out of screwfix. 


The lights were stuck around the map using strong glue and I had cut a hole out of the bottom part of the frame to leave room for the light's wire. When I first put my box up I immediately realised that I would need something to secure the wire to the wall for health and safety reasons and also to make it look more professional. The technician suggested I get trucking, which was cheap enough out of wickes, and so I cut these pieces to size and stuck them to the wall as they were self adhesive.

Tune in next time to see how the final piece looked!

bbyyyyyyyyyyyyeeeeeeeeeeeeeeeeeeeeeee
Róisín-x

Tuesday, 17 November 2015

Chapter 4 - The Slides

So my slides for my box consisted of black mounting board, black cartridge paper and a map on either acetate or tracing paper.

To make the map to give to my family to fill out, I took some screenshots of off google maps and then edited them so that map was only a black line to mark the roads. After each of my family members filled them out, I traced what they had written on either acetate or tracing paper, these were the maps that were going to go on the inside of the slides. To make them more secure and to protect the writing I laminated them.




I had tried out different methods of making the slides to see what would be the most secure and least flimsy to put on display. I found that cutting a window out of mounting board to be the most secure and suitable albeit it was the most expensive method. For the backing this didn't need to be as solid so I used black cartridge paper.



The process of making the slides was simple enough, however it was time consuming and was murder on my hands as I was having to be precise with the scalpel a lot of the time. I had took all the measurements to make sure the slide would be in the centre of the box and from this I made a template that I would follow and draw out all the slides from this rather than having to measure out all of the time. From the mounting board I cut out the shape and then the window for each of them and followed this same process for the cartridge paper.



After this was all done I found that to make the slide completely centred I would need to take off 5mm from the bottom of each of them. To do this I just used the guillotine and also used this to neaten and square off the edges.

In the next post I'll talk about the set up of my box - we're getting close to the end now :)

bbbbyyyyyyyyyyeeeeeeeeeeeeeee
Róisín -x

Sunday, 15 November 2015

Chapter 3 - The Box

So after my maquette didn't work I had the idea of making my piece more interactive. So I then set about the design and began to thin about how it would look.



I realised that if I wanted it to be interactive I would need to have some sort of storage for my slides to be displayed on and so tat people could easily put them back so that the slides themselves could be rearranged. I also changed my earlier design of the box so that instead of sliding the slides into the top of the box, you could slide them into the side to make them more easily accessible to more people.


For the storage for the slides I decided to go with a shelf as I thought that this would be the easiest and quickest to make. This also makes the slides displayed more openly so that the viewer can look through them and remove and put in slides more easily.


The box construction wasn't overly complicated as I used a bought photo frame from Matalan (£5) as the face of the box and added on an extension using timber that my dad had in the shed. The slots for the slides were made from dowling and gave room for 5 slides so that there was an adequate number of slides that could be viewed at the one time and the box wasn't too bulky. I also had to add a sort of floor to the bottom of the inside so that the slides were centred. 

Stay tuned for next time when I will talk about how I made the slides for the box :)
bbyyyyyeeeeee
Róisín -x



Tuesday, 10 November 2015

Chapter 2 - The Idea

So I had pretty much decided to go with maps for this and I then got the idea to layer maps on top of each other.





An idea I thought of doing as a way of displaying the layers of maps was making a light box. I drew a quick sketch and looked into what kind of lights that I would be able to get for my light box.



After this I made a small very basic maquette to see how my box would work. This showed me that the maps would work well in box form, but may be better on acetate to help the light travel through them. It also told me that I shouldn't have the LED light in the middle as this would mean the light would be shining directly into the viewer's eyes.


After talking with my lecturer I decided to look into how I could make my box interactive somehow, and make the layers be able to be rearranged.


It was after this I then set about making the box, which will be coming up in the next chapter :)

byyyyeeeee - 
Róisín -x

Monday, 9 November 2015

Chapter 1 - The Inspiration

So the first part of this process was the inspiration for my final piece. It began when really I didn't now what I was doing, my initial idea was to look at where teenagers hang about with friends ect. What I did was map out what I remembered my school being from memory and labelling the areas that we spent our time in.

This reminded me of an exercise I did in another class last year:


In this class we were given a map of the college and we were to change it however we wanted to. The lesson itself was inspired by the Situationist International organisation and their theory of dérive and psychgeography.


So after this I began looking at different maps and how I could make or draw them.






I also began looking for official maps that I could use or edit in some way. I found one of a non-place that I had looked at in some of my work because I was looking at where teenagers spend their time, and this is a common place in my local area for teenagers to go drinking in.


And so next came the idea - tune in next time to find out what that idea was :P

byyyyyeeeeeeee
Róisín -x

Friday, 6 November 2015

Light Boxes

Since my last post I had the idea of displaying my maps in a light box. So what I did was using a display box I got from a charity shop I glued in a push controlled LED light to the inside. I placed my maps behind the glass and then secured them in place using a glass photoframe.






However this light box didn't work quite as I had planned as the light didn't diffuse properly through the layers of paper. I think even if it had worked better I might not have followed through with it as I want the layers of tracing paper to be able to be flipped over by people.

Now I am thinking of displaying it like a tourist information board with the layers of tracing paper on top that people can lift and look through.

Here are the sketchbook pages I have:











byeee -
Róisín-x

Wednesday, 16 September 2015

Pencil Brief!!

So over the first couple of weeks back we got our first mini brief which was the essence of the pencil. At first I was stumped, but a few mind maps later I had began to come up with an idea. I looked at what a pencil meant to me, and to me the pencil is an object that opened doors to maths English etc, so I started to look into the idea of unlocking.



 At first I though of trying to make a traditional lock with the pencil acting as the key, however I decided not persuade this given the complication of actually making the lock and the time scale of the brief. I then simplified the idea down and decided I wanted to arrange a line of pencils into the shape of the pins in the lock. 





I then played about with different ideas of the background and thought how I would make the pencils stand out rather than just have a plain background. My first idea was to try and join up the pins as to how the key would look for this lock. However I thought that this distracted too much from the pencils themselves and so abandoned that idea. 



I then thought of using old past papers or textbooks as the background




I felt that these ideas definitely worked better, and then decided to go with past papers as the paper was a little brighter making the pencils stand out. I used a maths past paper as the background as I felt that this contained better imagery and also I had to use a pencil in this exam. 

To display the final piece I found an old decorative box in a second hand shop and it was the perfect size for my piece. I bought it for a couple of punds and then took the old display out, added in my pencils and background. I also tidied up the back of it a bit just to make it looker neater and cleaner.

'Unlocked'





We then had to critique our classmates work and write our questions for them on a piece of papaer. I think that this was a good idea as what came back from mine was that I maybe should have placed my sketchbook there as well to show my progression of ideas, and also explain bits of my concept a bit more. What I might do for next time is next to my artist statement have a QR code that links to a more descriptive blog post that would hopefully answer more questions they might have that I couldn't cover in the artist statement.

Anyway, that's one brief done only three more to go,
bye for now,

Róisín - x